
Best Energy-Saving Tips for Hot Tub Owners
Share
Hot tubs are a great way to relax, but they can consume a lot of energy if not managed properly. Reducing energy use not only saves money but also helps the environment.
Benefits of Energy Efficiency
-
Lowers monthly electricity bills
-
Reduces wear on your hot tub equipment
-
Keeps your spa running reliably
-
Less impact on the environment
How to Save Energy With Your Hot Tub
Small adjustments and consistent maintenance can make a big difference in your hot tub’s energy use.
Maintain the Right Water Temperature
-
Set the thermostat to 100°F to 102°F when in use.
-
Lower the temperature when the hot tub is not in use for long periods.
-
Use economy or sleep mode if your hot tub has it.
Keep the Cover On
-
Always use a high-quality, insulated cover when the tub is not in use.
-
Check the cover regularly for cracks or waterlogging and replace if needed.
Improve Insulation
-
Add insulation around the cabinet to keep heat from escaping.
-
Place a thermal blanket directly on the water surface under the cover.
Step-by-Step Guide to Reducing Energy Use
Step 1: Inspect and Upgrade the Cover
-
Make sure the cover fits tightly and seals properly.
-
Replace old or damaged covers with a more energy-efficient one.
Step 2: Check Water Chemistry
-
Balanced water keeps the heater and pump running efficiently.
-
Test and adjust pH, alkalinity, and sanitizer regularly.
Step 3: Schedule Filtration Cycles Wisely
-
Run filtration cycles during off-peak electricity hours if possible.
-
Adjust the duration so it’s long enough for clean water but not excessive.
Step 4: Monitor the Heater and Pump
-
Have a professional inspect the heater annually.
-
Keep the pump in good condition to prevent energy waste.
Tips for Long-Term Energy Savings
-
Upgrade to a more energy-efficient pump or heater.
-
Use LED lights instead of incandescent bulbs inside the spa.
-
Keep the hot tub in a sheltered area to reduce wind and heat loss.
-
Install a windbreak such as a fence, shrubs, or a screen.
Advanced Tips for Maximum Efficiency
-
Install a programmable timer for better control of operating hours.
-
Consider solar heating options to supplement electricity.
-
Replace old hot tubs with newer, energy-efficient models.
-
Drain and refill the water on schedule to avoid overworking the filtration system.
Common Mistakes That Waste Energy
-
Leaving the cover off or using a poorly fitting one.
-
Keeping the temperature higher than necessary.
-
Ignoring leaks or damaged insulation.
-
Running the pump and heater longer than needed.
By following these energy-saving tips, you can enjoy your hot tub while minimizing costs and conserving energy. A few thoughtful adjustments keep your spa efficient, comfortable, and eco-friendly all year long.