Pool Opening Kit

DIRECTIONS FOR USE

1. When preparing or using this product, take care not to splash, drip or use on surfaces such as ceramic tile, linoleum, formica brand counter surfaces, carpeting, etc. as etching or discoloration of these surfaces may take place.
2. This product is intended only for use as a pool and spa filter cleaner.

SAND FILTERS:

Turn off inlets and outlets for all chemical feeders. Close main drain and place filter in backwash position. Slowly add 1 pint of this product through strainer while backwashing. This product can also be added through the sand fill port. Run filter until product begins to come out of the backwash water or until the product is seen through a filter viewing cell. Soak filter for 30 to 60 minutes. After soaking, backwash filter until water comes out clean and foam clears. Reverse procedure and start normal filter operation. For sand filters containing more than 150 pounds of sand, add 1 quart of this product.

CARTRIDGE FILTERS:

Stop filter operation. Bleed off excess pressure through the filter safety valve. Open filter unit, remove cartridge from filter, and rinse excess loose dirt with a water hose from top to bottom. Place cartridge into a bucket and add 1 pint of this product and 2 1/2 gallons water. Make sure filter unit is completely covered by the cleaner. Soak 30 to 60 minutes. After soaking, rinse with hose at maximum pressure to remove excess filter cleaner or until foam residue is completely washed off. Re-install cartridge and resume normal filter operation.

DIATOMACEOUS EARTH FILTERS:

Stop filter operation. Bleed off excess pressure through safety valve. Remove filter elements (grids) from filter and rinse off excess dirt with a hose from top to bottom. Place grids in a bucket and add 1 pint of this product and 2 1/2 gallons water. Make sure grids are fully immersed in cleaner. Soak 30 to 60 minutes. After soaking, rinse out excess filter cleaner with hose at maximum pressure. Re-install grid and add new filter media. Resume normal filter operation.

⭐⭐⭐⭐⭐

Brand Website Reviews

AquaDoc reviewers commonly describe the Pool Opening Kit as a comprehensive set of essential products designed to help get pool water balanced and ready for the swim season. Many users highlight that the included chemicals and step-by-step guidance simplify the often-complex opening process. Overall feedback focuses on its convenience, straightforward application, and help in establishing clear, balanced water early in the season.

Amazon Review Summary

Amazon reviewers who purchased the AquaDoc Pool Opening Kit often mention that it makes the start-of-season process easier by bundling necessary treatments together. Users appreciate that it removes the guesswork from water balancing and helps achieve stable chemistry faster than sourcing components separately.

Walmart Review Summary

Walmart reviewers of the AquaDoc Pool Opening Kit frequently note that the kit’s components work well together and that the instructions help guide them through the opening routine. Many users highlight improved water clarity and less manual testing once the kit is applied as directed.

Reddit Discussions

On Reddit and pool care forums, pool owners who reference the AquaDoc Pool Opening Kit typically discuss it as a helpful tool for simplifying the pool opening routine. Users often share that the kit helps them get water into a swim-ready state with fewer steps and less confusion than starting from scratch.

Can I use AquaDoc’s Pool Starter Kit for both inground and above-ground pools?

Yes, AquaDoc’s Pool Starter Kit is formulated for use with both inground and above-ground pools as part of standard pool opening procedures.

Is AquaDoc’s Pool Opening Kit safe for use with different pool filter types?

Yes, AquaDoc’s Pool Opening Kit is compatible with cartridge, DE, and sand filter systems when used according to product instructions.