Hot Tub & Spa Filter Cleaner
Hot Tub & Spa Filter Cleaner
Simplify cleaning and extend filter life for consistently clear spa water.
Our Filter Cleaner simplifies and speeds up cleaning, ensuring prolonged filter lifespan and consistently pristine, clear water for your ultimate spa experience.
DIRECTIONS FOR USE:
1. When preparing or using this product, take care not to splash, drip or use on surfaces such as ceramic tile, linoleum, formica brand counter surfaces, carpeting, etc. as etching or discoloration of these surfaces may take place.
2. This product is intended only for use as a pool and spa filter cleaner.
SAND FILTERS:
Turn off inlets and outlets for all chemical feeders. Close main drain and place filter in backwash position. Slowly add 1 pint of this product through strainer while backwashing. This product can also be added through the sand fill port. Run filter until product begins to come out of the backwash water or until the product is seen through a filter viewing cell. Soak filter for 30 to 60 minutes. After soaking, backwash filter until water comes out clean and foam clears. Reverse procedure and start normal filter operation. For sand filters containing more than 150 pounds of sand, add 1 quart of this product.
CARTRIDGE FILTERS:
Stop filter operation. Bleed off excess pressure through the filter safety valve. Open filter unit, remove cartridge from filter, and rinse excess loose dirt with a water hose from top to bottom. Place cartridge into a bucket and add 1 pint of this product and 2 1/2 gallons water. Make sure filter unit is completely covered by the cleaner. Soak 30 to 60 minutes. After soaking, rinse with hose at maximum pressure to remove excess filter cleaner or until foam residue is completely washed off. Re-install cartridge and resume normal filter operation.
DIATOMACEOUS EARTH FILTERS:
Stop filter operation. Bleed off excess pressure through safety valve. Remove filter elements (grids) from filter and rinse off excess dirt with a hose from top to bottom. Place grids in a bucket and add 1 pint of this product and 2 1/2 gallons water. Make sure grids are fully immersed in cleaner. Soak 30 to 60 minutes. After soaking, rinse out excess filter cleaner with hose at maximum pressure. Re-install grid and add new filter media. Resume normal filter operation.
Will this work with my filter type?
Yes, our filter cleaner works with hot tub, spa, and pool filters of all types.
How long do I soak my filter in the cleaning solution?
Our filter cleaner is fast-acting. Soak for just 30 - 60 minutes. No need to soak overnight.
How do I clean my filter?
We get this question a lot. That's why we've made a really simple guide on the correct way to clean your filter.
Where is it made?
Our product is proudly made, packaged, and shipped from the USA.
Why is AquaDoc the Best in Pool Chemicals?
- 🌿 Paraben free & Aluminum free
- 📦 Fast Shipping
- 🇺🇸 Made in the USA
Order With Confidence
If our products don't solve your (pool or spa-related) headaches, contact us for a 100% refund. Free shipping on all orders over $75! Â
As seen on
100% Paraben Free
Say goodbye to parabens that can potentially be harmful to your family. All of AquaDoc's chemicals are paraben and aluminum free.