Different Types of Hot Tub Filters
There are three types of hot tub filters: cartridge filters, sand filters, and dematiaceous filters. Each of these filters has its merits and demerits, and a consumer should make an informed decision before the purchase process. Below are the characteristics of the hot tub filters:
- Cartridge Hot Tub Filters - the hot tub filter has a high-efficiency rating. It is easy to maintain, and it can last for at least three years. These are by far the most common filters used. Other filters mentioned are mostly used with Pool + Hot Tub combined setups.
- Sand Hot Tub Filters - the filter is affordable and doesn't require too much maintenance. It is also less effective. The main advantage is that it doesn't get clogged easily. It can last for at least five years.
- Dematiaceous Earth Hot Tub Filters (DE) - the filter is expensive and requires regular maintenance. It lasts for three years; however, it poses some health risks to the users.
About Hot Tub Filters
When looking into your hot tub's health, you should be considerate about the filter you use. The filter takes in dirty and contaminated water from the spa and cleans it before it back into the spa. Please make sure the water used in the spa is clean such that it should not contain any debris or harmful materials.
Below, we'll delve into the different types of hot tub filters in an in-depth manner:
1. Hot Tub Cartridge Filters
Cartridge filters cost more, and they are more efficient. They should be maintained regularly as compared to sand filters. The filter has a plastic cylinder, and a polyester filter has been put in place. The water will flow from one end, and small particles (at least 10 micros) are captured. The clean water then gets back into the sap. The filter's lifespan is three years, and it lasts depending on the amount of work it does.
The filter requires to be cleaned regularly, which means you should remove it physically and rinse it for it to operate effectively. Also, these filters should be sprayed using filter cleaner. The chemical ensures the filter is clean, and it operates efficiently.
2. Sand Hot Tub Filters
This is the cheapest option if you're on a budget. You'll also spend less money on the filter maintenance process. The lifespan of the filter is determined by the amount of work that should be done.
When operating a sand filter, make sure you are good at chemistry. Since such filters are less effective than the rest, they capture large particles, which means the spa's chemical composition should be well balanced to ensure the smaller particles in the water won't pose a significant issue.
3. Dematiaceous Filters
This filter is expensive as compared to the other two listed above. Despite being expensive, it guarantees value for your money such that it ensures the water is extremely clean. The filter can get rid of particles as small as 5 microns. Rest assured that the water you use in the hot tub is safe and clean with such a filter.
The hot tub filter is efficient since it has an internal grid covered with white powder made from aquatic organisms that effectively filter and clean the water. The powder also helps to get rid of pests that usually invade the water. The filter lasts for two to three years.
Regardless of the hot tub filter you are using, regular cleaning and care are paramount.
How to Properly Clean Hot Tub Filters
To ensure the hot tub's water quality is good, and the filter lasts for a long time, the filters should be cleaned regularly. Regardless of the method you use, you should use a hot tub filter cleaner. The highly recommended cleaning methods include:
- A Quick Rinse Weekly- remove the filter once a week and rinse it well using fresh water. Take time to get rid of the debris. The filter should be rinsed again. Before it is placed back in the hot tub, it should be allowed to air dry.
- Rinsing Monthly using chemicals- remove the filters and spray them down with the filter cleaner. The solution should sit for 30 to 60 minutes as directed by the manufacturer. Rinse the filter thoroughly and return it to the spa unit.
3. Chemical soaking- carry out chemical soaking every three to four months. Submerge the filter into the cleaning solution depending on the instructions offered and allow it to stay overnight in the solution. The filter should be rinsed thoroughly before it is allowed to air dry.
When Should You Change Hot Tub Filters?
Hot tub filters should be replaced annually. If the cartridge is damaged, you should replace the filters right away. Operating in a spa that has worn out filters is hazardous, and you may experience different health problems. The hot tub incurs some damages too. The hot tub warranty may also be at stake when you use dirty filters.
Conclusion on different pool & spa filter types
There are different types of hot tub filters that you can choose from; however, they should be cleaned and maintained regularly. The filters can be rinsed weekly to ensure they are operating well. When cleaning the filters, don't use household products such as dish soap and bleach. Depending on the type of hot tub filter you're using, it is advisable to replace the filters annually.