Inflatable Spa Chlorine Starter Kit (Instructions)
Filling & Draining
Fill the Inflatable Spa & Hot Tub to the correct water level (at least halfway up the top skimmer/filter opening). Test pH and Alkalinity using Test Strips at least weekly. pH should be between 7.2 and 7.8; total alkalinity should be between 80 and 140 ppm; water/calcium hardness should be between 200 to 400ppm. If not, make the necessary adjustments using the pH Increaser, pH Decreaser & Alkalinity Increaser, and Calcium Increaser. Use Stain & Scale to prevent & remove mineral scale buildup and to protect your spa components. Add Chlorinating Granules to quickly dissolve contaminants in your water. If your spa is not Chlorine-compatible, try our Inflatable Bromine Spa Starter Kit.
Sanitizing
Maintain the recommended chlorine level at all times. Aquadoc Chlorinating Granules recommends maintaining 3-5ppm of FAC (free available chlorine) while the hot tub/spa is in use. Test the chlorine level regularly, especially before and after each use. Add Chlorinating Granules as needed to achieve proper levels.
Weekly
Test water using Test Strips; adjust total alkalinity, pH levels, and calcium hardness using pH Increaser, pH Decreaser, Alkalinity Increaser & Calcium Increaser accordingly. Add Chlorinating Granules when necessary. Add Water Clarifier to defend against cloudy water, Spa Defoamer to get rid of the foam, and Chlorine Free Shock after every use to quickly oxidize contaminants.
Important
Circulate your Spa or Hot tub water for at least a few minutes after any chemical addition and before adding another product. Please follow the instructions on the container of each chemical in the kit carefully for maximum results and safety!
Always follow the directions on your insert and product labels.